Ski vises

AlpineZone

Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: Ski vises

  1. #1

    Ski vises

    This might be so niche is gets no replies, but does anyone have experience with multiple brands of ski vises?



    Looking for recommendations, as there's very little available on-line, and most of what I can find are obviously (in actuality) advertisements disguised as reviews.
    President - Bicknell's Thrush Extermination Solutions (BTES), LLC



  2. #2
    Quote Originally Posted by BenedictGomez View Post
    This might be so niche is gets no replies, but does anyone have experience with multiple brands of ski vises?

    Looking for recommendations, as there's very little available on-line, and most of what I can find are obviously (in actuality) advertisements disguised as reviews.
    Bought this one recently and it's very well made. https://rover.ebay.com/rover/0/0/0?m...2F292171443406 it's all metal and the vice holds well.

    Sent from my XT1650 using Tapatalk
    15-16 Killington 11-17-16

  3. #3
    Wintersteiger Sport Plus. Available on Amazon. $80.
    Great multi-purpose vise and a reasonable price. You can spend much more.
    I tune a lot, 3 kids in racing.

  4. #4
    Quote Originally Posted by prsboogie View Post
    Bought this one recently and it's very well made. https://rover.ebay.com/rover/0/0/0?m...2F292171443406 it's all metal and the vice holds well.

    Sent from my XT1650 using Tapatalk
    That's one of the ones I've been looking at!

    I definitely want to go with one of the 3 clamp models, and that seems like a good price point given it's all metal. My only question is how well/easy is it to clamp onto and hold the bindings of skis that are >=100mm underfoot?
    President - Bicknell's Thrush Extermination Solutions (BTES), LLC



  5. #5
    Does anyone have experience with, The Jaws of the BEAST?

    That's the other 3 contact model I'm looking at, a bit more expensive at $110.

    https://www.beasttuning.com/Jaws-of-...ise-p/3020.htm
    President - Bicknell's Thrush Extermination Solutions (BTES), LLC



  6. #6
    Quote Originally Posted by BenedictGomez View Post
    That's one of the ones I've been looking at!

    I definitely want to go with one of the 3 clamp models, and that seems like a good price point given it's all metal. My only question is how well/easy is it to clamp onto and hold the bindings of skis that are >=100mm underfoot?
    It holds onto the heel well. No issues - so far anyway. Whatever you do get the three piece with a clamp, I have a swix with a rope center tiedown which I do not like. The ends are fine just can't seem to keep the ski stable while scraping wax

    Sent from my XT1650 using Tapatalk
    15-16 Killington 11-17-16

  7. #7
    Scruffy's Avatar
    Join Date
    Nov 2008
    Location
    In the shadow of the moon.
    Posts
    1,066
    Can't compare, since I've had this one for ~ 25 years now and it's always worked very well.

    http://www.tognar.com/profi-ski-vise...nafit-nnn-sns/

    It comes with a boot dummy that you click in your binding and that locks the ski down. There are multiple holes in the boot dummy tongue, so you can push the center of the ski and bend it slightly so you can really get a snug hold on your ski if you need it.





    The vise also has the ability to quickly put the ski on either a 45* angled edge or straight edge; like this:



    A lot of the time, if I'm doing light work on the ski or simply waxing, I don't bother with clamping in the ski with the boot dummy, I simply put the ski on the ski vise and the rubber on the tops of the vise holds it nicely, or the ski nestles into the 45* position and is held firm enough for sharpening. Or the quick vertical clamps hold the ski in the vertical position firmly.

    Check the link for the product above, and read the description. Holds a lot of ski and binding types.

    Mine has lasted ~25 years and is still going strong. If I need to replace it, I wouldn't hesitate to buy the same model again.

  8. #8
    thetrailboss's Avatar
    Join Date
    Jun 2004
    Location
    NEK by Birth; Alta/Snowbird by Choice
    Posts
    26,766
    Quote Originally Posted by BenedictGomez View Post
    This might be so niche is gets no replies, but does anyone have experience with multiple brands of ski vises?

    Looking for recommendations, as there's very little available on-line, and most of what I can find are obviously (in actuality) advertisements disguised as reviews.
    I have a Swix model that is about 14 years old. Love it. It is not your conventional vice, but a model with a center "boot" insert holder that locks your bindings down. There are two separate anchor points to support the tips and tails. The three pieces easily flip down to allow for edge sharpening. It is awesome, but I doubt that the make it anymore.

    Completely agree that finding ski tuning supplies can be difficult. And it seems that there are way too many items made by Swix and Toko. I recommend checking out Reliable Racing for tuning stuff.

    It also seems to me that manufacturers want to make it difficult for the "average" skier who wants to tune so as to protect the shops. Supplies are ridiculously overpriced for what they are. That said, once you know what you are doing, you can find stuff at REI and online by doing some research. Just my observation.
    Live, Ski, or Die!


  9. #9
    thetrailboss's Avatar
    Join Date
    Jun 2004
    Location
    NEK by Birth; Alta/Snowbird by Choice
    Posts
    26,766
    Live, Ski, or Die!


  10. #10
    Quote Originally Posted by thetrailboss View Post

    Completely agree that finding ski tuning supplies can be difficult. And it seems that there are way too many items made by Swix and Toko. I recommend checking out Reliable Racing for tuning stuff.

    It also seems to me that manufacturers want to make it difficult for the "average" skier who wants to tune so as to protect the shops. Supplies are ridiculously overpriced for what they are.
    That said, once you know what you are doing, you can find stuff at REI and online by doing some research. Just my observation.
    It's very hard. In fact, to get a good deal on a complete set of brushes I actually bought online from a store in your neck of the woods (Sandy) rather than locally, because they cobbled them together as a package, rather than having to buy them all individually. Saved some money.

    Then on wax, I found a place that was taking a Swix 900 gram box of five 180 gram blocks and breaking them up to sell the blocks individually in plastic sandwich bags. LOL. Saved a few bucks per block that way. That same shop is taking the high-end pricey waxes and cutting them in half and selling 1/2 bars that way too. LOL I doubt manufacturers would be happy with that, but yes, it's kind of crazy how limited options are other than going to ski shops where the markup is large.
    President - Bicknell's Thrush Extermination Solutions (BTES), LLC



Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
All times are GMT -5. The time now is 9:09 PM.