loafer89
New member
Thank you both for the advice. The spindles that I am using are 2x2x36" that I cut to 31" to fit better on my porch. They are the colonial style spindles from Home Depot.
I have already sanded the 4x4" posts, especially where I screwed them into the ceiling and filled the holes with wood filler. The top rail has also been sanded smooth. I am using a B&D mouse sander with 220
grit to get into small places and sand the spindles.
I will be using Valspar paint which goes on like paste after I seal the wood with primer. Hopefully it will be done by the 4th, but the fog and drizzle is slowing things down :x
I have already sanded the 4x4" posts, especially where I screwed them into the ceiling and filled the holes with wood filler. The top rail has also been sanded smooth. I am using a B&D mouse sander with 220
grit to get into small places and sand the spindles.
I will be using Valspar paint which goes on like paste after I seal the wood with primer. Hopefully it will be done by the 4th, but the fog and drizzle is slowing things down :x