• Welcome to AlpineZone, the largest online community of skiers and snowboarders in the Northeast!

    You may have to REGISTER before you can post. Registering is FREE, gets rid of the majority of advertisements, and lets you participate in giveaways and other AlpineZone events!

Wood Core GS ski with softer tip

Madroch

New member
Joined
Nov 13, 2008
Messages
1,490
Points
0
Location
ct
Okay, before Greg sells the cabrawlers out from under me, anyone have some recommendations on a softer tipped GS ski that might be a nice bump ski and general front side carver. I would assume an all wood core would be prefereerable due to weight and livliness. Any thoughts would be appreciated.
 
Last edited:

Madroch

New member
Joined
Nov 13, 2008
Messages
1,490
Points
0
Location
ct
Do they even make all wood core GS skis? I should have thought of that first, I suppose-- probably only with dampening materials....
 

skibum9995

New member
Joined
Jan 28, 2006
Messages
667
Points
0
Location
Hooksett, NH
In my experience GS skis suck in the bumps. I'd try to find a cheater ski that only has one sheet of metal in it. won't have quite the same stability and edge grip on the groomers, but still pretty good, and it will be a bit softer. From what I hear the Rossi race skis trend to the softer side.
 

Madroch

New member
Joined
Nov 13, 2008
Messages
1,490
Points
0
Location
ct
Was thinking cheater most definately-- race carveresque. I have loved my fischers- I may try the WC cheater or the Race RC, both of which are supposed to be fairly soft and are primarily wood. I have heard the Rossi's may be softer as well- not familiar with thier cheater versions, have to look them up.
 

Glenn

Active member
Joined
Oct 1, 2008
Messages
7,692
Points
38
Location
CT & VT
A set of twins may not be bad. My Hotrod Nitrous's aren't bad in the bumps. But my twins are a heck of a lot better. Now, I can't lay down the trenches on groomers on the twins like I can with the Hotrods...but I can easily ski the entire mountain with them.
 

Deliberate1

New member
Joined
Mar 15, 2009
Messages
6
Points
0
Location
Sedgwick, Maine
I am using Blizzard TItan Cronus all over the mountain. Has a wood core, lively tip and is just so easy to ski it is almost sinful. At 88mm in the waist it is no dedicated carving machine, but it definitely holds an edge, nearly as well as my Elan Ripsticks which is a switchblade in the shape of a ski. No speed limit either. I skied the Blizzard in pow/woods at Vail and on the very steeps in soft snow and bumps at Deer Valley within the last month. On soft, these skis just rip. And at Saddleback last Sunday they were very good on hard pack and king of the crud. Of all skis in my quiver, these are the ones I reach for first. I am level 9, 5' 9 about 160 and ski the 173. I have seen some used on Ebay for real cheap. You will love them.
D1
 
Top