• Welcome to AlpineZone, the largest online community of skiers and snowboarders in the Northeast!

    You may have to REGISTER before you can post. Registering is FREE, gets rid of the majority of advertisements, and lets you participate in giveaways and other AlpineZone events!

Newly tuned skis are killing me!

o3jeff

New member
Joined
Mar 12, 2007
Messages
9,792
Points
0
Location
Southington, CT
If you had them stone ground make sure the base pattern isn't too aggressive and make sure the pattern doesn't continue into the base edge.This can make the skis very grabby.

I had this happen to a pair of skis last year, made it almost impossible to skid my turns.
 

Morwax

New member
Joined
Feb 23, 2011
Messages
505
Points
0
People still de-tune skis nowadays? That's still SOP in ski shops? I really wasn't aware of that. I thought de-tuning went out with straight skis...? I tune my skis every couple of ski days and sharpen them tip to tail. Do it for my carving skis and twintip freeride/powder skis. Love it when I roll the ankle and the tips hook right up.

Bottom line, it doesn't matter how your skis are tuned, just have fun!!

+1 Amen to that... sharper the better
 

dropKickMurphy

New member
Joined
Jan 5, 2006
Messages
213
Points
0
Use a straight edge to make sure the base is level from edge to edge. I got a tune from (an unnamed) local shop a couple of years ago. Something just didn't quite feel right after that. Brought them into a shop on the mountain. The tech eyeballed it, took a straight edge and found the base was concave.
 

catskillman

Well-known member
Joined
Aug 6, 2009
Messages
1,227
Points
48
I'd be willing to bet $$$$ that you had them stoneground. It seems to be a probem 90% of the time myself and others had a problem I will never do it again.

4 years!!! I tune mine after a weekend of skiing, especially if it is icy.
 

Puck it

Well-known member
Joined
Oct 26, 2006
Messages
9,714
Points
48
Location
Franconia, NH
I never tune my skis. I'm so good, it seems unfair to keep them in top condition.

Found your onesy too!

vintage-80s-retro-one-piece-neon-gaper-ski-suit_170593741832.jpg
 

RSTuthill

New member
Joined
Dec 4, 2010
Messages
48
Points
0
This thread seems to have gotten a bit off topic. But let me offer this.

The ski behavior that you descrive can be linked to base bevel not properly set after a grind. If they left it at zero bevel after the grind it can be corrected by setting it to half a degree. Also if they improperly set the side bevel to a substantially smaller angle than 87 degrees, lets say, they can get grabby. But if you check them and they are close to 0.5 and 87, then and only then, would I detune the tips and tails.
 

SIKSKIER

New member
Joined
Nov 13, 2006
Messages
3,667
Points
0
Location
Bedford and Franconia NH
We call those fag bags.No offense meant.Detuning a ski 6 inches each side of your binding?Why bother having them tuned?Just file that 2 foot area yourself.

What the OP is descibing is what I always refered to as the ski being railed and is usually caused by the base being ground lower than the edges.I've had them before and it is not a good feeling.You can check to see if this is the case very easily by putting a true bar or something you know it absolutely flat across the base.You'll see if your ski is base high or concave.Even detunung had limited results for me.I ran a file agressively and all was well.
 
Top