• Welcome to AlpineZone, the largest online community of skiers and snowboarders in the Northeast!

    You may have to REGISTER before you can post. Registering is FREE, gets rid of the majority of advertisements, and lets you participate in giveaways and other AlpineZone events!

Edge Tools

Mullen

New member
Joined
Nov 9, 2007
Messages
110
Points
0
Location
860
I need to replace my edging tool this season. This is the one I have currently http://www.backcountry.com/dakine-e...EB8&mr:referralID=NA&origin=pla&mr:adType=pla
mine is pretty beat up and I need new files/diamond stones as well.

I ride a 2degree bevel on both the side and base edges, but my brother and wife ride different bevels now and I'm the one that tunes all of these. So I'm looking for something that has an adjustable angle for both the side and base edges.

What are my fellow tuners using??
 

Madroch

New member
Joined
Nov 13, 2008
Messages
1,490
Points
0
Location
ct
What do you guys use to remove sidewall... looking for alternatives to the overpriced designated sidewall removers....
 

drjeff

Well-known member
Joined
Jan 18, 2006
Messages
19,537
Points
113
Location
Brooklyn, CT
i need to fashion a better bench for holding the skis while i (attempt to) tune them.

You don't really realize how much force you can exert on a bench and vise while you're working on a pair of skis until you're actually doing it.

I have a tuning bench that I bought from Reliable Racing Supply that is somewhat similar to this Swix bench

http://www.reliableracing.com/detail.cfm?edp=11332673

Does a great job stability wise on most any surface from concrete to carpet since the legs are a good 4+ feet apart and at enough of a divergent angle that it stays stable even through some agressive edge filing and base planing. Plus the almost 4 feet or so of bench length does a good job at getting the vises and/or stabilizing blocks far enough apart that you can have the tips and tails well supported in the vise without being able to generate enough lever forces to "pop" the other end of the ski out of the vise
 

SKIQUATTRO

New member
Joined
Oct 28, 2005
Messages
3,232
Points
0
Location
LI, NY
check Tognar....they have a variety of edge tools that change bevels easily
 

goldsbar

New member
Joined
Jan 26, 2004
Messages
497
Points
0
Location
New Jersey
The plastic adjustable types are generally considered crap by "real" tuners. Not so sure it's true but that's the opinion you'll get on epic ski. I use the SVST (Sun Valley Ski Tool) fixed guides available at Tognar. More expensive but you'll only need one or two and as they're a solid peice of metal they should last a lifetime.

BTW - if you don't know, never tune the base edge (maybe a light stone) unless your skis are ground flat, only the side.
 

Mullen

New member
Joined
Nov 9, 2007
Messages
110
Points
0
Location
860
I'd agree with you there....on "real tuners" considering them crap. But they work just fine for the every day skier or rider, and most of the time they are only used to maintain that side edge.
Great point on only sharpening the side edge......the base edge only if it's damaged. If you are really picky about a super exact angle just have a shop you trust do it when your equipment is new, and just maintain them.
 
Top