• Welcome to AlpineZone, the largest online community of skiers and snowboarders in the Northeast!

    You may have to REGISTER before you can post. Registering is FREE, gets rid of the majority of advertisements, and lets you participate in giveaways and other AlpineZone events!

MTB Tire Pressure

WoodCore

Well-known member
Joined
Jun 15, 2007
Messages
3,269
Points
48
Location
CT
Obviously this will vary for numerous reasons but what tire pressure do you typically run on your MTB?
 

bvibert

Moderator
Staff member
Moderator
Joined
Aug 30, 2004
Messages
30,394
Points
38
Location
Torrington, CT
It depends on how anxious I am to change a pinch flat. I like around 35, but it's usually more like 40 to help keep the pinch flats down...
 

Greg

Moderator
Staff member
Moderator
Joined
Jul 1, 2001
Messages
31,154
Points
0
Started with 37 this season. Going to probably soften them a bit.
 

Greg

Moderator
Staff member
Moderator
Joined
Jul 1, 2001
Messages
31,154
Points
0
Besides from "pinch flats" what are the advantages of running at a lower psi?

Better traction, but more rolling resistance. And lower PSI is not an advantage in terms of pitch flats. They are more likely at lower pressures. It's a trade-off. I'm light so I can get away with lower 30's. A big guy like Brian is going to pinch flat at the same PSI that works fine for me.
 

RootDKJ

New member
Joined
Nov 15, 2005
Messages
7,866
Points
0
Location
Summit
Website
phresheez.com
Better traction, but more rolling resistance. And lower PSI is not an advantage in terms of pitch flats. They are more likely at lower pressures. It's a trade-off. I'm light so I can get away with lower 30's. A big guy like Brian is going to pinch flat at the same PSI that works fine for me.

Better traction
Cool, thanks. When I first started biking, I was getting them all the time until I raised up my psi.
 

rueler

New member
Joined
Sep 1, 2008
Messages
387
Points
0
Location
Bristol, CT
I usually run 35 psi...but, could easily go much lower because I run a tubeless set-up...the trails have been really dry lately so I have been running around 40 psi so I can roll a bit faster.
 

bvibert

Moderator
Staff member
Moderator
Joined
Aug 30, 2004
Messages
30,394
Points
38
Location
Torrington, CT
I usually run 35 psi...but, could easily go much lower because I run a tubeless set-up...the trails have been really dry lately so I have been running around 40 psi so I can roll a bit faster.

Do you have a UST setup?
 

Greg

Moderator
Staff member
Moderator
Joined
Jul 1, 2001
Messages
31,154
Points
0
I rode Friday night and checked pressure on Saturday for the first time in a few weeks and I was well below 30. :-o Luckily, I didn't pinch flat, but I only brought it up to 35.
 

Marc

New member
Joined
Sep 12, 2005
Messages
7,526
Points
0
Location
Dudley, MA
Website
www.marcpmc.com
Aside from better traction, riding with lower pressure will generally be conducive to NOT bouncing off every rock and root in the trail. Usually you'll have, or at least feel like you have, better control.

I ride around 35. I could probably get away with lower, but since I have softie full suspension and I abso-fing-lutely hate changing flats on the trail, I'll stay there.
 

Talisman

New member
Joined
Nov 1, 2004
Messages
673
Points
0
Location
New England, ayup
I could probably get away with lower, but since I have softie full suspension and I abso-fing-lutely hate changing flats on the trail, I'll stay there.

I run at ~35 to 28 PSIG to avoid pinch flats. My typical pinch flats come from a slow leak from a thorn early in the ride to a flat while biting flies are at their worst. Fixing flats is fun in a well lit area with cold beer and no deer flies. Kneeling in the mud with a swarm of mosquitos as night falls while fixing the flat is another story.
 

Greg

Moderator
Staff member
Moderator
Joined
Jul 1, 2001
Messages
31,154
Points
0
Interesting study on rolling resistance off-road:

http://www.bicicletta.co.za/Downloadable docs/Rolling Resistance Eng illustrated.pdf

Fat tires and low pressure seem like the way to go. :beer:

I found these sentences amusing:

The rougher the ground, the greater the advantage, as the data obtained on grass proves.

...but the rougher the ground, the greater the effect, as the grassy ground shows.

:blink: I never thought of grass as being "rough ground"... :lol:
 
Top